1 Тема від Paveldz Востаннє редагувалося Paveldz (02.03.2017 11:49:11)

  • Paveldz
  • Paveldz
  • Користувач
  • Поза форумом
  • Дата реєстрації: 15.05.2015
  • Повідомлень: 78
    • Репутація: 10

Тема: Автозапуск сервісу Ubuntu

Всім привіт. Не можу зрозуміти чому не працює автозапуск сервісів (tor, privoxy).

Дивлюсь через 

service --status-all

там пише, що вони є у списку. Але працюють тільки після команд 

service tor start
service privoxy start

Після перезавантаження системи потрібно знову заходити в термінал і запускати їх по новій. Це дуже незручно. Можете мені підказати, що робити?

Paveldz вебсайт

2 Відповідь від Master_Sergius

  • Дата реєстрації: 01.10.2014
  • Повідомлень: 1 068
    • Репутація: 805

Re: Автозапуск сервісу Ubuntu

Ubuntu 16+? Ще потрібно зробити їх "enable".

3 Відповідь від Paveldz Востаннє редагувалося Paveldz (02.03.2017 12:06:37)

  • Paveldz
  • Paveldz
  • Користувач
  • Поза форумом
  • Дата реєстрації: 15.05.2015
  • Повідомлень: 78
    • Репутація: 10

Re: Автозапуск сервісу Ubuntu

Так. Ubuntu 16.04 LTS Server.

Я робив так:

update-rc.d -f tor remove && update-rc.d -f tor defaults && 
update-rc.d -f privoxy remove && update-rc.d -f privoxy defaults && update-rc.d -f privoxy enable

Але після цієї дії нічого не змінилось.

Paveldz вебсайт

4 Відповідь від Master_Sergius

  • Дата реєстрації: 01.10.2014
  • Повідомлень: 1 068
    • Репутація: 805

Re: Автозапуск сервісу Ubuntu

sudo systemctl enable tor

5 Відповідь від Paveldz

  • Paveldz
  • Paveldz
  • Користувач
  • Поза форумом
  • Дата реєстрації: 15.05.2015
  • Повідомлень: 78
    • Репутація: 10

Re: Автозапуск сервісу Ubuntu

Робив так:

sudo systemctl enable tor
sudo systemctl enable privoxy

Каже, що все добре, що сервіси додані але після перезавантаження все рівно не працює.

Paveldz вебсайт

6 Відповідь від Paveldz

  • Paveldz
  • Paveldz
  • Користувач
  • Поза форумом
  • Дата реєстрації: 15.05.2015
  • Повідомлень: 78
    • Репутація: 10

Re: Автозапуск сервісу Ubuntu

Я не уточнив один момент, що в списку статусу privoxy є але біля нього стоїть символ "-", що він не запущенний.

Paveldz вебсайт

7 Відповідь від Master_Sergius

  • Дата реєстрації: 01.10.2014
  • Повідомлень: 1 068
    • Репутація: 805

Re: Автозапуск сервісу Ubuntu

Paveldz написав:

Робив так:

sudo systemctl enable tor
sudo systemctl enable privoxy

Каже, що все добре, що сервіси додані але після перезавантаження все рівно не працює.

Давайте вивід dmesg, тра досліджувати. Можливо, він хоче стартанути після якогось сервісу, а його нема і тому не може.
Покажіть іще 

systemctl list-dependencies tor

8 Відповідь від Paveldz

  • Paveldz
  • Paveldz
  • Користувач
  • Поза форумом
  • Дата реєстрації: 15.05.2015
  • Повідомлень: 78
    • Репутація: 10

Re: Автозапуск сервісу Ubuntu

├─system.slice
● ├─tor@default.service
● ├─tor@default.service
● └─sysinit.target
●   ├─apparmor.service
●   ├─brltty.service
●   ├─console-setup.service
●   ├─dev-hugepages.mount
●   ├─dev-mqueue.mount
●   ├─ebtables.service
●   ├─friendly-recovery.service
●   ├─iscsid.service
●   ├─keyboard-setup.service
●   ├─kmod-static-nodes.service
●   ├─lvm2-lvmetad.socket
●   ├─lvm2-lvmpolld.socket
●   ├─lvm2-monitor.service
●   ├─open-iscsi.service
●   ├─plymouth-read-write.service
●   ├─plymouth-start.service
●   ├─proc-sys-fs-binfmt_misc.automount
●   ├─qemu-kvm.service

Paveldz вебсайт

9 Відповідь від Paveldz

  • Paveldz
  • Paveldz
  • Користувач
  • Поза форумом
  • Дата реєстрації: 15.05.2015
  • Повідомлень: 78
    • Репутація: 10

Re: Автозапуск сервісу Ubuntu

▼Прихований текст
[    0.000000] microcode: CPU0 microcode updated early to revision 0x1e, date = 2015-08-13
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-62-generic (buildd@lcy01-30) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #83-Ubuntu SMP Wed Jan 18 14:10:15 UTC 2017 (Ubuntu 4.4.0-62.83-generic 4.4.40)
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.4.0-62-generic root=/dev/mapper/pokemon--vg-root ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000096aaffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000096ab0000-0x0000000097eaffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000097eb0000-0x000000009cabefff] usable
[    0.000000] BIOS-e820: [mem 0x000000009cabf000-0x000000009cebefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009cebf000-0x000000009cfbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
[    0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009f9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff980000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 20238/INVALID, BIOS 79CN41WW(V3.01) 11/08/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x25f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-protect
[    0.000000]   E8000-EFFFF write-combining
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7F80000000 write-back
[    0.000000]   1 base 0080000000 mask 7FE0000000 write-back
[    0.000000]   2 base 009D000000 mask 7FFF000000 uncachable
[    0.000000]   3 base 009E000000 mask 7FFE000000 uncachable
[    0.000000]   4 base 00FF800000 mask 7FFF800000 write-protect
[    0.000000]   5 base 0100000000 mask 7F00000000 write-back
[    0.000000]   6 base 0200000000 mask 7F80000000 write-back
[    0.000000]   7 base 025F600000 mask 7FFFE00000 uncachable
[    0.000000]   8 base 025F800000 mask 7FFF800000 uncachable
[    0.000000]   9 base 0260000000 mask 7FE0000000 uncachable
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x0220b000, 0x0220bfff] PGTABLE
[    0.000000] BRK [0x0220c000, 0x0220cfff] PGTABLE
[    0.000000] BRK [0x0220d000, 0x0220dfff] PGTABLE
[    0.000000] BRK [0x0220e000, 0x0220efff] PGTABLE
[    0.000000] BRK [0x0220f000, 0x0220ffff] PGTABLE
[    0.000000] BRK [0x02210000, 0x02210fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x330d0000-0x3585ffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x000000009CFFE210 0000AC (v01 LENOVO CB-01    00000001      01000013)
[    0.000000] ACPI: FACP 0x000000009CFF7000 00010C (v05 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DSDT 0x000000009CFE9000 00AE0E (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FACS 0x000000009CFBA000 000040
[    0.000000] ACPI: SLIC 0x000000009CFFD000 000176 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: UEFI 0x000000009CFFC000 000236 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FPDT 0x000000009CFFA000 000044 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: MSDM 0x000000009CFF9000 000055 (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: ASF! 0x000000009CFF8000 0000A5 (v32 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: HPET 0x000000009CFF6000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: APIC 0x000000009CFF5000 00008C (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: MCFG 0x000000009CFF4000 00003C (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFE6000 002028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: BOOT 0x000000009CFE4000 000028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: LPIT 0x000000009CFE3000 000094 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: ASPT 0x000000009CFE1000 000034 (v07 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DBGP 0x000000009CFE0000 000034 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFDF000 000539 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFDE000 000AD8 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFDA000 00348C (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000025f5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x25f5f8000-0x25f5fcfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000025f5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000096aaffff]
[    0.000000]   node   0: [mem 0x0000000097eb0000-0x000000009cabefff]
[    0.000000]   node   0: [mem 0x000000009cfff000-0x000000009cffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000025f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000025f5fffff]
[    0.000000] On node 0 totalpages: 2075740
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 9883 pages used for memmap
[    0.000000]   DMA32 zone: 632512 pages, LIFO batch:31
[    0.000000]   Normal zone: 22488 pages used for memmap
[    0.000000]   Normal zone: 1439232 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0x9da00000-0x9f9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x96ab0000-0x97eaffff]
[    0.000000] PM: Registered nosave memory: [mem 0x9cabf000-0x9cebefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9cebf000-0x9cfbefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9cfbf000-0x9cffefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9d000000-0x9f9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff97ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff980000-0xffffffff]
[    0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88025f200000 s98264 r8192 d28712 u262144
[    0.000000] pcpu-alloc: s98264 r8192 d28712 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2043284
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.4.0-62-generic root=/dev/mapper/pokemon--vg-root ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8045400K/8302960K available (8436K kernel code, 1291K rwdata, 3960K rodata, 1488K init, 1316K bss, 257560K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     Build-time adjustment of leaf fanout to 64.
[    0.000000]     RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:488 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2394.553 MHz processor
[    0.000028] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.10 BogoMIPS (lpj=9578212)
[    0.000030] pid_max: default: 32768 minimum: 301
[    0.000035] ACPI: Core revision 20150930
[    0.010718] ACPI: 5 ACPI AML tables successfully acquired and loaded
[    0.010736] Security Framework initialized
[    0.010738] Yama: becoming mindful.
[    0.010752] AppArmor: AppArmor initialized
[    0.011223] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.012663] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.013287] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.013296] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.013488] Initializing cgroup subsys io
[    0.013491] Initializing cgroup subsys memory
[    0.013497] Initializing cgroup subsys devices
[    0.013499] Initializing cgroup subsys freezer
[    0.013501] Initializing cgroup subsys net_cls
[    0.013502] Initializing cgroup subsys perf_event
[    0.013504] Initializing cgroup subsys net_prio
[    0.013507] Initializing cgroup subsys hugetlb
[    0.013508] Initializing cgroup subsys pids
[    0.013529] CPU: Physical Processor ID: 0
[    0.013530] CPU: Processor Core ID: 0
[    0.013534] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.013534] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.014426] mce: CPU supports 9 MCE banks
[    0.014445] CPU0: Thermal monitoring enabled (TM1)
[    0.014454] process: using mwait in idle threads
[    0.014457] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.014458] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.014789] Freeing SMP alternatives memory: 32K (ffffffff820b8000 - ffffffff820c0000)
[    0.018674] ftrace: allocating 32065 entries in 126 pages
[    0.031092] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.031093] smpboot: Max logical packages: 2
[    0.031491] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.071178] TSC deadline timer enabled
[    0.071181] smpboot: CPU0: Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.071193] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[    0.071212] ... version:                3
[    0.071213] ... bit width:              48
[    0.071213] ... generic registers:      4
[    0.071214] ... value mask:             0000ffffffffffff
[    0.071215] ... max period:             00007fffffffffff
[    0.071216] ... fixed-purpose events:   3
[    0.071216] ... event mask:             000000070000000f
[    0.071972] x86: Booting SMP configuration:
[    0.071973] .... node  #0, CPUs:      #1
[    0.075383] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.075453]  #2
[    0.077004] microcode: CPU2 microcode updated early to revision 0x1e, date = 2015-08-13
[    0.080045]  #3
[    0.083478]  #4
[    0.085029] microcode: CPU4 microcode updated early to revision 0x1e, date = 2015-08-13
[    0.088083]  #5
[    0.091538]  #6
[    0.093092] microcode: CPU6 microcode updated early to revision 0x1e, date = 2015-08-13
[    0.096170]  #7
[    0.099584] x86: Booted up 1 node, 8 CPUs
[    0.099586] smpboot: Total of 8 processors activated (38312.84 BogoMIPS)
[    0.107034] devtmpfs: initialized
[    0.109081] evm: security.selinux
[    0.109082] evm: security.SMACK64
[    0.109083] evm: security.SMACK64EXEC
[    0.109084] evm: security.SMACK64TRANSMUTE
[    0.109084] evm: security.SMACK64MMAP
[    0.109085] evm: security.ima
[    0.109086] evm: security.capability
[    0.109141] PM: Registering ACPI NVS region [mem 0x9cebf000-0x9cfbefff] (1048576 bytes)
[    0.109229] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.109316] pinctrl core: initialized pinctrl subsystem
[    0.109412] RTC time: 11:13:16, date: 03/02/17
[    0.109520] NET: Registered protocol family 16
[    0.118885] cpuidle: using governor ladder
[    0.138894] cpuidle: using governor menu
[    0.138898] PCCT header not found.
[    0.138936] Simple Boot Flag at 0x44 set to 0x1
[    0.138975] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.138976] ACPI: bus type PCI registered
[    0.138977] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.139052] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.139054] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.139064] PCI: Using configuration type 1 for base access
[    0.139091] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.151237] ACPI: Added _OSI(Module Device)
[    0.151238] ACPI: Added _OSI(Processor Device)
[    0.151239] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.151240] ACPI: Added _OSI(Processor Aggregator Device)
[    0.157049] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.157823] ACPI: Dynamic OEM Table Load:
[    0.157830] ACPI: SSDT 0xFFFF8802556EB800 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20120518)
[    0.158425] ACPI: Dynamic OEM Table Load:
[    0.158431] ACPI: SSDT 0xFFFF8802556F1800 0005AA (v01 PmRef  ApIst    00003000 INTL 20120518)
[    0.159068] ACPI: Dynamic OEM Table Load:
[    0.159073] ACPI: SSDT 0xFFFF880255789E00 000119 (v01 PmRef  ApCst    00003000 INTL 20120518)
[    0.160604] ACPI : EC: EC started
[    0.162070] ACPI: Interpreter enabled
[    0.162094] ACPI: (supports S0 S3 S4 S5)
[    0.162095] ACPI: Using IOAPIC for interrupt routing
[    0.162117] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.263591] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.263596] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.263694] \_SB_.PCI0:_OSC invalid UUID
[    0.263694] _OSC request data:1 1f 0 
[    0.263698] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.264151] PCI host bridge to bus 0000:00
[    0.264154] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.264155] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.264157] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.264158] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window]
[    0.264160] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.264167] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[    0.264298] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
[    0.264311] pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb03fffff 64bit]
[    0.264317] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
[    0.264321] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.264443] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[    0.264454] pci 0000:00:03.0: reg 0x10: [mem 0xb0610000-0xb0613fff 64bit]
[    0.264598] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[    0.264623] pci 0000:00:14.0: reg 0x10: [mem 0xb0600000-0xb060ffff 64bit]
[    0.264672] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.264759] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.264791] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[    0.264817] pci 0000:00:16.0: reg 0x10: [mem 0xb0618000-0xb061800f 64bit]
[    0.264867] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.264990] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[    0.265017] pci 0000:00:1a.0: reg 0x10: [mem 0xb061d000-0xb061d3ff]
[    0.265085] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.265188] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.265223] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[    0.265247] pci 0000:00:1b.0: reg 0x10: [mem 0xb0614000-0xb0617fff 64bit]
[    0.265303] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.265392] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.265423] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[    0.265483] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.265601] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.265634] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400
[    0.265694] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.265808] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.265840] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[    0.265900] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.266025] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[    0.266052] pci 0000:00:1d.0: reg 0x10: [mem 0xb061c000-0xb061c3ff]
[    0.266120] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.266222] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.266255] pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100
[    0.266460] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[    0.266481] pci 0000:00:1f.2: reg 0x10: [io  0x4088-0x408f]
[    0.266489] pci 0000:00:1f.2: reg 0x14: [io  0x4094-0x4097]
[    0.266496] pci 0000:00:1f.2: reg 0x18: [io  0x4080-0x4087]
[    0.266503] pci 0000:00:1f.2: reg 0x1c: [io  0x4090-0x4093]
[    0.266510] pci 0000:00:1f.2: reg 0x20: [io  0x4060-0x407f]
[    0.266518] pci 0000:00:1f.2: reg 0x24: [mem 0xb061b000-0xb061b7ff]
[    0.266544] pci 0000:00:1f.2: PME# supported from D3hot
[    0.266655] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[    0.266670] pci 0000:00:1f.3: reg 0x10: [mem 0xb0619000-0xb06190ff 64bit]
[    0.266690] pci 0000:00:1f.3: reg 0x20: [io  0x4040-0x405f]
[    0.266858] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.266920] pci 0000:02:00.0: [168c:0032] type 00 class 0x028000
[    0.266961] pci 0000:02:00.0: reg 0x10: [mem 0xb0500000-0xb057ffff 64bit]
[    0.267017] pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    0.267071] pci 0000:02:00.0: supports D1 D2
[    0.267073] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.267106] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.274988] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.274993] pci 0000:00:1c.1:   bridge window [mem 0xb0500000-0xb05fffff]
[    0.275105] pci 0000:03:00.0: [1969:10a0] type 00 class 0x020000
[    0.275172] pci 0000:03:00.0: reg 0x10: [mem 0xb0400000-0xb043ffff 64bit]
[    0.275217] pci 0000:03:00.0: reg 0x18: [io  0x3000-0x307f]
[    0.275391] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.275460] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.283011] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.283015] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
[    0.283018] pci 0000:00:1c.2:   bridge window [mem 0xb0400000-0xb04fffff]
[    0.331332] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    0.331374] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.331414] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.331453] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.331492] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.331531] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.331570] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.331609] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    0.331714] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.331756] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.331846] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.331848] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.331850] vgaarb: loaded
[    0.331851] vgaarb: bridge control possible 0000:00:02.0
[    0.332051] SCSI subsystem initialized
[    0.332082] libata version 3.00 loaded.
[    0.332101] ACPI: bus type USB registered
[    0.332114] usbcore: registered new interface driver usbfs
[    0.332121] usbcore: registered new interface driver hub
[    0.332141] usbcore: registered new device driver usb
[    0.332258] PCI: Using ACPI for IRQ routing
[    0.337778] PCI: pci_cache_line_size set to 64 bytes
[    0.337827] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    0.337829] e820: reserve RAM buffer [mem 0x96ab0000-0x97ffffff]
[    0.337830] e820: reserve RAM buffer [mem 0x9cabf000-0x9fffffff]
[    0.337831] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
[    0.337832] e820: reserve RAM buffer [mem 0x25f600000-0x25fffffff]
[    0.337928] NetLabel: Initializing
[    0.337929] NetLabel:  domain hash size = 128
[    0.337930] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.337941] NetLabel:  unlabeled traffic allowed by default
[    0.337994] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.337998] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.340011] amd_nb: Cannot enumerate AMD northbridges
[    0.340024] clocksource: Switched to clocksource hpet
[    0.345113] AppArmor: AppArmor Filesystem Enabled
[    0.345171] pnp: PnP ACPI init
[    0.345277] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.345279] system 00:00: [io  0xffff] has been reserved
[    0.345281] system 00:00: [io  0xffff] has been reserved
[    0.345282] system 00:00: [io  0xffff] has been reserved
[    0.345284] system 00:00: [io  0x1800-0x18fe] could not be reserved
[    0.345285] system 00:00: [io  0xfd60-0xfd63] has been reserved
[    0.345287] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.345290] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.345331] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.345333] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.345352] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.345391] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.345393] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.345438] pnp 00:04: Plug and Play ACPI device, IDs SYN2b15 SYN0700 SYN0002 PNP0f13 (active)
[    0.345508] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.392172] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.392175] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.392176] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.392177] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.392179] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[    0.392181] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.392182] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.392183] system 00:06: [mem 0xff000000-0xff000fff] has been reserved
[    0.392185] system 00:06: [mem 0xff010000-0xffffffff] could not be reserved
[    0.392187] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.392188] system 00:06: [mem 0x9fa20000-0x9fa20fff] has been reserved
[    0.392190] system 00:06: [mem 0x9fa10000-0x9fa1ffff] has been reserved
[    0.392192] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.392540] pnp: PnP ACPI: found 7 devices
[    0.398575] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.398581] pci 0000:02:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[    0.398592] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.398594] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.398596] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.398612] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.398613] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.398615] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.398617] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.398618] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.398620] pci 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.398623] pci 0000:00:1c.0: BAR 14: assigned [mem 0x9fb00000-0x9fcfffff]
[    0.398627] pci 0000:00:1c.0: BAR 15: assigned [mem 0x9fd00000-0x9fefffff 64bit pref]
[    0.398629] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.398632] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.398635] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.398640] pci 0000:00:1c.0:   bridge window [mem 0x9fb00000-0x9fcfffff]
[    0.398644] pci 0000:00:1c.0:   bridge window [mem 0x9fd00000-0x9fefffff 64bit pref]
[    0.398651] pci 0000:02:00.0: BAR 6: assigned [mem 0xb0580000-0xb058ffff pref]
[    0.398652] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.398657] pci 0000:00:1c.1:   bridge window [mem 0xb0500000-0xb05fffff]
[    0.398664] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.398667] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
[    0.398671] pci 0000:00:1c.2:   bridge window [mem 0xb0400000-0xb04fffff]
[    0.398679] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.398681] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.398682] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.398684] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff window]
[    0.398685] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.398686] pci_bus 0000:01: resource 1 [mem 0x9fb00000-0x9fcfffff]
[    0.398688] pci_bus 0000:01: resource 2 [mem 0x9fd00000-0x9fefffff 64bit pref]
[    0.398689] pci_bus 0000:02: resource 1 [mem 0xb0500000-0xb05fffff]
[    0.398690] pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
[    0.398692] pci_bus 0000:03: resource 1 [mem 0xb0400000-0xb04fffff]
[    0.398721] NET: Registered protocol family 2
[    0.398857] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.398960] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.399081] TCP: Hash tables configured (established 65536 bind 65536)
[    0.399102] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.399123] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.399171] NET: Registered protocol family 1
[    0.399182] pci 0000:00:02.0: Video device with shadowed ROM
[    1.999979] pci 0000:00:1a.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[    3.599914] pci 0000:00:1d.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[    3.600088] pci 0000:03:00.0: set MSI_INTX_DISABLE_BUG flag
[    3.600092] PCI: CLS 64 bytes, default 64
[    3.600132] Trying to unpack rootfs image as initramfs...
[    4.184894] Freeing initrd memory: 40512K (ffff8800330d0000 - ffff880035860000)
[    4.184914] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    4.184916] software IO TLB [mem 0x98abf000-0x9cabf000] (64MB) mapped at [ffff880098abf000-ffff88009cabefff]
[    4.184971] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[    4.184973] hw unit of domain pp0-core 2^-14 Joules
[    4.184973] hw unit of domain package 2^-14 Joules
[    4.184974] hw unit of domain dram 2^-14 Joules
[    4.184975] hw unit of domain pp1-gpu 2^-14 Joules
[    4.185065] Scanning for low memory corruption every 60 seconds
[    4.185378] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    4.185409] audit: initializing netlink subsys (disabled)
[    4.185421] audit: type=2000 audit(1488453200.172:1): initialized
[    4.185755] Initialise system trusted keyring
[    4.185867] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    4.185868] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    4.187054] zbud: loaded
[    4.187240] VFS: Disk quotas dquot_6.6.0
[    4.187266] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    4.187476] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    4.187664] fuse init (API version 7.23)
[    4.187774] Key type big_key registered
[    4.187795] Allocating IMA MOK and blacklist keyrings.
[    4.188207] Key type asymmetric registered
[    4.188210] Asymmetric key parser 'x509' registered
[    4.188241] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    4.188276] io scheduler noop registered
[    4.188279] io scheduler deadline registered (default)
[    4.188303] io scheduler cfq registered
[    4.188681] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    4.188686] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    4.188709] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[    4.188710] vesafb: scrolling: redraw
[    4.188711] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    4.188720] vesafb: framebuffer at 0xa0000000, mapped to 0xffffc90001000000, using 4160k, total 4160k
[    4.188791] Console: switching to colour frame buffer device 170x48
[    4.188804] fb0: VESA VGA frame buffer device
[    4.188817] intel_idle: MWAIT substates: 0x42120
[    4.188818] intel_idle: v0.4.1 model 0x3C
[    4.188819] intel_idle: lapic_timer_reliable_states 0xffffffff
[    4.189117] ACPI: AC Adapter [ACAD] (on-line)
[    4.189170] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0
[    4.189173] ACPI: Power Button [PWRB]
[    4.189207] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    4.189225] ACPI: Lid Switch [LID0]
[    4.189253] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    4.189255] ACPI: Power Button [PWRF]
[    4.189835] thermal LNXTHERM:00: registered as thermal_zone0
[    4.189837] ACPI: Thermal Zone [TZ00] (58 C)
[    4.189880] GHES: HEST is not enabled!
[    4.189972] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    4.272025] ACPI: Battery Slot [BAT1] (battery present)
[    4.272319] Linux agpgart interface v0.103
[    4.275442] brd: module loaded
[    4.276762] loop: module loaded
[    4.276950] libphy: Fixed MDIO Bus: probed
[    4.276954] tun: Universal TUN/TAP device driver, 1.6
[    4.276955] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    4.276996] PPP generic driver version 2.4.2
[    4.277058] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.277063] ehci-pci: EHCI PCI platform driver
[    4.277164] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    4.277170] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    4.277180] ehci-pci 0000:00:1a.0: debug port 2
[    4.281070] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    4.281080] ehci-pci 0000:00:1a.0: irq 16, io mem 0xb061d000
[    4.291942] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    4.291991] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    4.291993] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.291994] usb usb1: Product: EHCI Host Controller
[    4.291996] usb usb1: Manufacturer: Linux 4.4.0-62-generic ehci_hcd
[    4.291997] usb usb1: SerialNumber: 0000:00:1a.0
[    4.292175] hub 1-0:1.0: USB hub found
[    4.292180] hub 1-0:1.0: 2 ports detected
[    4.292406] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    4.292411] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    4.292423] ehci-pci 0000:00:1d.0: debug port 2
[    4.296326] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    4.296336] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb061c000
[    4.307924] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    4.307976] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    4.307978] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.307979] usb usb2: Product: EHCI Host Controller
[    4.307981] usb usb2: Manufacturer: Linux 4.4.0-62-generic ehci_hcd
[    4.307982] usb usb2: SerialNumber: 0000:00:1d.0
[    4.308167] hub 2-0:1.0: USB hub found
[    4.308173] hub 2-0:1.0: 2 ports detected
[    4.308301] ehci-platform: EHCI generic platform driver
[    4.308318] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.308323] ohci-pci: OHCI PCI platform driver
[    4.308334] ohci-platform: OHCI generic platform driver
[    4.308344] uhci_hcd: USB Universal Host Controller Interface driver
[    4.308471] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    4.308475] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    4.309554] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[    4.309559] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    4.309637] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    4.309638] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.309639] usb usb3: Product: xHCI Host Controller
[    4.309641] usb usb3: Manufacturer: Linux 4.4.0-62-generic xhci-hcd
[    4.309642] usb usb3: SerialNumber: 0000:00:14.0
[    4.309820] hub 3-0:1.0: USB hub found
[    4.309837] hub 3-0:1.0: 14 ports detected
[    4.312814] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    4.312818] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    4.312848] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    4.312850] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.312851] usb usb4: Product: xHCI Host Controller
[    4.312852] usb usb4: Manufacturer: Linux 4.4.0-62-generic xhci-hcd
[    4.312853] usb usb4: SerialNumber: 0000:00:14.0
[    4.313028] hub 4-0:1.0: USB hub found
[    4.313039] hub 4-0:1.0: 4 ports detected
[    4.313749] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS1] at 0x60,0x64 irq 1,12
[    4.359266] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.359270] serio: i8042 AUX port at 0x60,0x64 irq 12
[    4.359442] mousedev: PS/2 mouse device common for all mice
[    4.361149] rtc_cmos 00:02: RTC can wake from S4
[    4.361347] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    4.361374] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
[    4.361382] i2c /dev entries driver
[    4.361432] device-mapper: uevent: version 1.0.3
[    4.361550] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    4.361565] Intel P-state driver initializing.
[    4.361831] ledtrig-cpu: registered to indicate activity on CPUs
[    4.363011] NET: Registered protocol family 10
[    4.363475] NET: Registered protocol family 17
[    4.363505] Key type dns_resolver registered
[    4.364257] microcode: CPU0 sig=0x306c3, pf=0x10, revision=0x1e
[    4.364280] microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x1e
[    4.364293] microcode: CPU2 sig=0x306c3, pf=0x10, revision=0x1e
[    4.364314] microcode: CPU3 sig=0x306c3, pf=0x10, revision=0x1e
[    4.364363] microcode: CPU4 sig=0x306c3, pf=0x10, revision=0x1e
[    4.364386] microcode: CPU5 sig=0x306c3, pf=0x10, revision=0x1e
[    4.364433] microcode: CPU6 sig=0x306c3, pf=0x10, revision=0x1e
[    4.364456] microcode: CPU7 sig=0x306c3, pf=0x10, revision=0x1e
[    4.364573] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    4.365094] registered taskstats version 1
[    4.365147] Loading compiled-in X.509 certificates
[    4.367402] Loaded X.509 cert 'Build time autogenerated kernel key: a630254739635d6fdc487c9f0afa5d9a0ff04f04'
[    4.367453] zswap: loaded using pool lzo/zbud
[    4.369320] Key type trusted registered
[    4.372186] Key type encrypted registered
[    4.372193] AppArmor: AppArmor sha1 policy hashing enabled
[    4.372196] ima: No TPM chip found, activating TPM-bypass!
[    4.372212] evm: HMAC attrs: 0x1
[    4.372641]   Magic number: 9:463:225
[    4.372758] rtc_cmos 00:02: setting system clock to 2017-03-02 11:13:20 UTC (1488453200)
[    4.372899] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    4.372901] EDD information not available.
[    4.372965] PM: Hibernation image not present or could not be loaded.
[    4.373971] Freeing unused kernel memory: 1488K (ffffffff81f44000 - ffffffff820b8000)
[    4.373972] Write protecting the kernel read-only data: 14336k
[    4.374376] Freeing unused kernel memory: 1792K (ffff880001840000 - ffff880001a00000)
[    4.374659] Freeing unused kernel memory: 136K (ffff880001dde000 - ffff880001e00000)
[    4.384634] random: systemd-udevd: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
[    4.384695] random: systemd-udevd: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
[    4.384708] random: systemd-udevd: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
[    4.384721] random: systemd-udevd: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
[    4.385242] random: udevadm: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
[    4.385282] random: udevadm: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
[    4.385668] random: udevadm: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
[    4.385719] random: udevadm: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
[    4.385748] random: udevadm: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
[    4.385776] random: udevadm: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
[    4.400853] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    4.403439] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    4.411679] ahci 0000:00:1f.2: version 3.0
[    4.412400] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    4.412623] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x30 impl SATA mode
[    4.412625] ahci 0000:00:1f.2: flags: 64bit ncq stag led clo pio slum part ems apst 
[    4.413903] [drm] Initialized drm 1.1.0 20060810
[    4.415283] alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [20:1a:06:86:89:69]
[    4.424661] scsi host0: ahci
[    4.424743] scsi host1: ahci
[    4.424875] scsi host2: ahci
[    4.424948] scsi host3: ahci
[    4.425011] scsi host4: ahci
[    4.425137] scsi host5: ahci
[    4.425180] ata1: DUMMY
[    4.425181] ata2: DUMMY
[    4.425182] ata3: DUMMY
[    4.425183] ata4: DUMMY
[    4.425186] ata5: SATA max UDMA/133 abar m2048@0xb061b000 port 0xb061b300 irq 25
[    4.425189] ata6: SATA max UDMA/133 abar m2048@0xb061b000 port 0xb061b380 irq 25
[    4.436112] AVX2 version of gcm_enc/dec engaged.
[    4.436114] AES CTR mode by8 optimization enabled
[    4.454218] alx 0000:03:00.0 enp3s0: renamed from eth0
[    4.454946] [drm] Memory usable by graphics device = 2048M
[    4.454949] checking generic (a0000000 410000) vs hw (a0000000 10000000)
[    4.454950] fb: switching to inteldrmfb from VESA VGA
[    4.454973] Console: switching to colour dummy device 80x25
[    4.455024] [drm] Replacing VGA console driver
[    4.461264] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    4.461265] [drm] Driver supports precise vblank timestamp query.
[    4.461930] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    4.523733] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    4.523998] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    4.524101] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[    4.525239] fbcon: inteldrmfb (fb0) is primary device
[    4.525294] Console: switching to colour frame buffer device 170x48
[    4.525311] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    4.603902] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    4.619886] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    4.623908] usb 3-1: new low-speed USB device number 2 using xhci_hcd
[    4.736280] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[    4.736283] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.736638] hub 1-1:1.0: USB hub found
[    4.736726] hub 1-1:1.0: 6 ports detected
[    4.747920] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    4.752246] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[    4.752248] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.752380] hub 2-1:1.0: USB hub found
[    4.752483] hub 2-1:1.0: 8 ports detected
[    4.754006] ata5.00: ATA-8: ST1000LM024 HN-M101MBB, 2BA30001, max UDMA/133
[    4.754016] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    4.754853] usb 3-1: New USB device found, idVendor=04b3, idProduct=310c
[    4.754856] usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    4.754857] usb 3-1: Product: USB Optical Mouse
[    4.754935] usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    4.760085] ata5.00: configured for UDMA/133
[    4.760275] scsi 4:0:0:0: Direct-Access     ATA      ST1000LM024 HN-M 0001 PQ: 0 ANSI: 5
[    4.760466] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    4.760469] sd 4:0:0:0: [sda] 4096-byte physical blocks
[    4.760478] sd 4:0:0:0: Attached scsi generic sg0 type 0
[    4.760506] sd 4:0:0:0: [sda] Write Protect is off
[    4.760508] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.760527] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.760698] hidraw: raw HID events driver (C) Jiri Kosina
[    4.763289] usbcore: registered new interface driver usbhid
[    4.763291] usbhid: USB HID core driver
[    4.764671] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:04B3:310C.0001/input/input7
[    4.764801] hid-generic 0003:04B3:310C.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:14.0-1/input0
[    4.789945]  sda: sda1 sda2 < sda5 >
[    4.790762] sd 4:0:0:0: [sda] Attached SCSI disk
[    4.919904] usb 3-4: new high-speed USB device number 3 using xhci_hcd
[    5.079902] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    5.083900] ata6.00: ATAPI: PLDS DVD-RW DS8A9SH, EL3A, max UDMA/100
[    5.085221] ata6.00: configured for UDMA/100
[    5.086060] usb 3-4: New USB device found, idVendor=0bda, idProduct=5728
[    5.086064] usb 3-4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    5.086066] usb 3-4: Product: Lenovo EasyCamera
[    5.086067] usb 3-4: Manufacturer: CF0DAU3J9
[    5.086069] usb 3-4: SerialNumber: 200901010001
[    5.092175] scsi 5:0:0:0: CD-ROM            PLDS     DVD-RW DS8A9SH   EL3A PQ: 0 ANSI: 5
[    5.113208] sr 5:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    5.113212] cdrom: Uniform CD-ROM driver Revision: 3.20
[    5.113385] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    5.113453] sr 5:0:0:0: Attached scsi generic sg1 type 5
[    5.183889] tsc: Refined TSC clocksource calibration: 2394.458 MHz
[    5.183893] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2283c44026a, max_idle_ns: 440795260713 ns
[    5.255867] usb 3-8: new high-speed USB device number 4 using xhci_hcd
[    5.392127] usb 3-8: New USB device found, idVendor=0bda, idProduct=0129
[    5.392130] usb 3-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.392140] usb 3-8: Product: USB2.0-CRW
[    5.392141] usb 3-8: Manufacturer: Generic
[    5.392142] usb 3-8: SerialNumber: 20100201396000000
[    5.395495] md: linear personality registered for level -1
[    5.395903] usbcore: registered new interface driver rtsx_usb
[    5.400858] md: multipath personality registered for level -4
[    5.402501] md: raid0 personality registered for level 0
[    5.404287] md: raid1 personality registered for level 1
[    5.475849] raid6: sse2x1   gen()  9592 MB/s
[    5.543840] raid6: sse2x1   xor()  6932 MB/s
[    5.611855] raid6: sse2x2   gen() 12398 MB/s
[    5.679825] raid6: sse2x2   xor()  8129 MB/s
[    5.747840] raid6: sse2x4   gen() 13473 MB/s
[    5.815863] raid6: sse2x4   xor()  9583 MB/s
[    5.883861] raid6: avx2x1   gen() 18352 MB/s
[    5.951822] raid6: avx2x2   gen() 22517 MB/s
[    6.019821] raid6: avx2x4   gen() 25130 MB/s
[    6.019824] raid6: using algorithm avx2x4 gen() 25130 MB/s
[    6.019824] raid6: using avx2x2 recovery algorithm
[    6.020719] xor: automatically using best checksumming function:
[    6.059817]    avx       : 33001.000 MB/sec
[    6.062148] async_tx: api initialized (async)
[    6.067025] md: raid6 personality registered for level 6
[    6.067027] md: raid5 personality registered for level 5
[    6.067028] md: raid4 personality registered for level 4
[    6.073262] md: raid10 personality registered for level 10
[    6.166538] psmouse serio1: synaptics: queried max coordinates: x [..5728], y [..4902]
[    6.183937] clocksource: Switched to clocksource tsc
[    6.384750] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400/0x0, board id: 1695, fw id: 739436
[    6.525767] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[    9.450521] random: nonblocking pool is initialized
[   13.815345] NET: Registered protocol family 38
[   14.711845] Btrfs loaded
[   15.120605] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[   16.462444] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[   16.462606] systemd[1]: Detected architecture x86-64.
[   16.484815] systemd[1]: Set hostname to <pokemon>.
[   19.374052] systemd[1]: Reached target User and Group Name Lookups.
[   19.374368] systemd[1]: Created slice User and Session Slice.
[   19.374407] systemd[1]: Listening on Journal Socket (/dev/log).
[   19.374437] systemd[1]: Listening on LVM2 metadata daemon socket.
[   19.374493] systemd[1]: Listening on Journal Audit Socket.
[   19.374577] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   19.374600] systemd[1]: Listening on udev Control Socket.
[   19.374620] systemd[1]: Listening on Journal Socket.
[   19.374637] systemd[1]: Listening on fsck to fsckd communication Socket.
[   19.374651] systemd[1]: Listening on LVM2 poll daemon socket.
[   19.374661] systemd[1]: Listening on udev Kernel Socket.
[   19.374679] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   19.374700] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   19.374711] systemd[1]: Listening on Syslog Socket.
[   19.374725] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   19.374862] systemd[1]: Created slice System Slice.
[   19.383519] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   19.384153] systemd[1]: Starting Journal Service...
[   19.384399] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice.
[   19.515485] systemd[1]: Starting Load Kernel Modules...
[   19.515876] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[   19.516376] systemd[1]: Starting Set console keymap...
[   19.516856] systemd[1]: Started Braille Device Support.
[   19.517191] systemd[1]: Created slice system-tor.slice.
[   19.517563] systemd[1]: Mounting POSIX Message Queue File System...
[   19.587412] systemd[1]: Mounting Debug File System...
[   19.587985] systemd[1]: Started Read required files in advance.
[   19.588098] systemd[1]: Reached target Slices.
[   19.588683] systemd[1]: Mounting Huge Pages File System...
[   19.589320] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[   19.589841] systemd[1]: Starting Uncomplicated firewall...
[   19.590969] systemd[1]: Started Create list of required static device nodes for the current kernel.
[   19.604038] systemd[1]: Starting Create Static Device Nodes in /dev...
[   19.945851] systemd[1]: Started Uncomplicated firewall.
[   20.253626] systemd[1]: Mounted POSIX Message Queue File System.
[   20.253711] systemd[1]: Mounted Debug File System.
[   20.253767] systemd[1]: Mounted Huge Pages File System.
[   20.371427] systemd[1]: Started LVM2 metadata daemon.
[   20.371969] systemd[1]: Started Journal Service.
[   20.385224] lp: driver loaded but no devices found
[   20.427767] ppdev: user-space parallel port driver
[   20.725338] Loading iSCSI transport class v2.0-870.
[   21.210321] iscsi: registered transport (tcp)
[   21.846229] iscsi: registered transport (iser)
[   25.685547] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[   25.974842] systemd-journald[527]: Received request to flush runtime journal from PID 1
[   26.351901] wmi: Mapper loaded
[   26.419844] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   26.513473] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input8
[   26.727575] EDAC MC: Ver: 3.0.0
[   26.935383] EDAC ie31200: No ECC support
[   27.337961] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   27.587839] snd_hda_codec_conexant hdaudioC1D0: CX20757: BIOS auto-probing.
[   27.588137] snd_hda_codec_conexant hdaudioC1D0: autoconfig for CX20757: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[   27.588139] snd_hda_codec_conexant hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   27.588140] snd_hda_codec_conexant hdaudioC1D0:    hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[   27.588142] snd_hda_codec_conexant hdaudioC1D0:    mono: mono_out=0x0
[   27.588143] snd_hda_codec_conexant hdaudioC1D0:    inputs:
[   27.588144] snd_hda_codec_conexant hdaudioC1D0:      Internal Mic=0x1a
[   27.588146] snd_hda_codec_conexant hdaudioC1D0:      Mic=0x19
[   27.588922] snd_hda_codec_conexant hdaudioC1D0: Enable sync_write for stable communication
[   27.591254] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[   27.591297] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[   27.702669] intel_rapl: Found RAPL domain package
[   27.702673] intel_rapl: Found RAPL domain core
[   27.702675] intel_rapl: Found RAPL domain uncore
[   27.702677] intel_rapl: Found RAPL domain dram
[   27.702681] intel_rapl: RAPL package 0 domain package locked by BIOS
[   27.875526] media: Linux media interface: v0.10
[   28.055365] Linux video capture interface: v2.00
[   28.122333] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[   28.122373] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[   28.122406] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[   28.380606] ath: phy0: Enable LNA combining
[   28.381767] ath: phy0: ASPM enabled: 0x42
[   28.381769] ath: EEPROM regdomain: 0x65
[   28.381769] ath: EEPROM indicates we should expect a direct regpair map
[   28.381771] ath: Country alpha2 being used: 00
[   28.381771] ath: Regpair used: 0x65
[   28.505243] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   28.505510] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90001500000, irq=17
[   28.618436] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (0bda:5728)
[   28.620859] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input14
[   28.620921] usbcore: registered new interface driver uvcvideo
[   28.620923] USB Video Class driver (1.1.1)
[   29.662654] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
[   31.213175] cfg80211: World regulatory domain updated:
[   31.213179] cfg80211:  DFS Master region: unset
[   31.213180] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   31.213182] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   31.213184] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   31.213185] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   31.213186] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   31.213188] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   31.213189] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   31.213190] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   31.213192] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   32.059311] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[   32.160136] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[   33.967234] Adding 8302076k swap on /dev/mapper/cryptswap1.  Priority:-1 extents:1 across:8302076k FS
[   33.992940] audit: type=1400 audit(1488453230.115:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=1354 comm="apparmor_parser"
[   34.030670] audit: type=1400 audit(1488453230.151:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default" pid=1349 comm="apparmor_parser"
[   34.030677] audit: type=1400 audit(1488453230.151:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-cgns" pid=1349 comm="apparmor_parser"
[   34.030691] audit: type=1400 audit(1488453230.151:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-mounting" pid=1349 comm="apparmor_parser"
[   34.030695] audit: type=1400 audit(1488453230.155:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-nesting" pid=1349 comm="apparmor_parser"
[   34.072745] audit: type=1400 audit(1488453230.195:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lxd/lxd-bridge-proxy" pid=1358 comm="apparmor_parser"
[   34.073134] audit: type=1400 audit(1488453230.195:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/libvirt/virt-aa-helper" pid=1356 comm="apparmor_parser"
[   34.106404] audit: type=1400 audit(1488453230.227:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=1351 comm="apparmor_parser"
[   34.106522] audit: type=1400 audit(1488453230.227:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=1359 comm="apparmor_parser"
[   34.106528] audit: type=1400 audit(1488453230.227:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1359 comm="apparmor_parser"
[   35.684013] cgroup: new mount options do not match the existing superblock, will be ignored
[   35.718501] cgroup: new mount options do not match the existing superblock, will be ignored
[   45.673959] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   45.688186] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   45.691086] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   45.693316] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   47.707862] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   48.589447] wlp2s0: authenticate with e0:a3:ac:0e:74:4f
[   48.603600] wlp2s0: send auth to e0:a3:ac:0e:74:4f (try 1/3)
[   48.605716] wlp2s0: authenticated
[   48.606120] wlp2s0: associate with e0:a3:ac:0e:74:4f (try 1/3)
[   48.611703] wlp2s0: RX AssocResp from e0:a3:ac:0e:74:4f (capab=0x411 status=0 aid=4)
[   48.611779] wlp2s0: associated
[   48.611786] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[   58.439221] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[   58.442959] vboxdrv: Found 8 processor cores
[   58.462017] vboxdrv: TSC mode is Invariant, tentative frequency 2394456715 Hz
[   58.462019] vboxdrv: Successfully loaded version 5.0.32_Ubuntu (interface 0x00240000)
[   58.466248] VBoxNetFlt: Successfully started.
[   58.469554] VBoxNetAdp: Successfully started.
[   58.472243] VBoxPciLinuxInit
[   58.473605] vboxpci: IOMMU not found (not registered)
[   65.205796] ip_tables: (C) 2000-2006 Netfilter Core Team
[   65.216407] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   65.226670] Ebtables v2.0 registered
[   65.722791] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[   65.765620] device virbr0-nic entered promiscuous mode
[   65.949870] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[   66.004958] virbr0: port 1(virbr0-nic) entered listening state
[   66.004974] virbr0: port 1(virbr0-nic) entered listening state
[   66.234507] virbr0: port 1(virbr0-nic) entered disabled state
[   66.392736] device virbr0-nic left promiscuous mode
[   66.392753] virbr0: port 1(virbr0-nic) entered disabled state
[  299.773302] mce: [Hardware Error]: Machine check events logged

Paveldz вебсайт

10 Відповідь від Master_Sergius

  • Дата реєстрації: 01.10.2014
  • Повідомлень: 1 068
    • Репутація: 805

Re: Автозапуск сервісу Ubuntu

А юніт-файл взагалі є? Покажіть його вміст, можливо по такому шляху (але не впевнений):

/etc/systemd/system/multi-user.target.wants/tor.service

11 Відповідь від Paveldz

  • Paveldz
  • Paveldz
  • Користувач
  • Поза форумом
  • Дата реєстрації: 15.05.2015
  • Повідомлень: 78
    • Репутація: 10

Re: Автозапуск сервісу Ubuntu

# This service is actually a systemd target,
# but we are using a service since targets cannot be reloaded.

[Unit]
Description=Anonymizing overlay network for TCP (multi-instance-master)

[Service]
Type=oneshot
RemainAfterExit=yes
ExecStart=/bin/true
ExecReload=/bin/true

[Install]
WantedBy=multi-user.target

Paveldz вебсайт

12 Відповідь від Paveldz

  • Paveldz
  • Paveldz
  • Користувач
  • Поза форумом
  • Дата реєстрації: 15.05.2015
  • Повідомлень: 78
    • Репутація: 10

Re: Автозапуск сервісу Ubuntu

Там в моєму пості №8 кружечки зліва деякі зеленим, а деякі червоним світятся. Це має значення? Вказати які рядочки яким кольором світяться?

Paveldz вебсайт

13 Відповідь від reverse2500

  • reverse2500
  • reverse2500
  • Я діск С на троянському коні
  • Поза форумом
  • Звідки: UA Львів
  • Дата реєстрації: 08.07.2014
  • Повідомлень: 2 745
    • Репутація: 1318

Re: Автозапуск сервісу Ubuntu

в мене питання, а в якому редакторі писались конфігурація ? Бо є таке в Unix-way відкрив в gedit, зберіг не з системним кодуванням, і все конфігурації не працюють

reverse2500 вебсайт

14 Відповідь від Paveldz

  • Paveldz
  • Paveldz
  • Користувач
  • Поза форумом
  • Дата реєстрації: 15.05.2015
  • Повідомлень: 78
    • Репутація: 10

Re: Автозапуск сервісу Ubuntu

reverse2500 написав:

в мене питання, а в якому редакторі писались конфігурація ? Бо є таке в Unix-way відкрив в gedit, зберіг не з системним кодуванням, і все конфігурації не працюють

Завжди через gedit все редагую.

Paveldz вебсайт

15 Відповідь від HetmanNet

  • HetmanNet
  • HetmanNet
  • Ліцензований троль форуму Replace
  • Поза форумом
  • Звідки: Кременчук, Україна
  • Дата реєстрації: 18.07.2012
  • Повідомлень: 4 740
    • Репутація: 2494

Re: Автозапуск сервісу Ubuntu

reverse2500 написав:

в мене питання, а в якому редакторі писались конфігурація ? Бо є таке в Unix-way відкрив в gedit, зберіг не з системним кодуванням, і все конфігурації не працюють

Здається таке є всюди :D

16 Відповідь від HetmanNet

  • HetmanNet
  • HetmanNet
  • Ліцензований троль форуму Replace
  • Поза форумом
  • Звідки: Кременчук, Україна
  • Дата реєстрації: 18.07.2012
  • Повідомлень: 4 740
    • Репутація: 2494

Re: Автозапуск сервісу Ubuntu

Paveldz написав:
# This service is actually a systemd target,
# but we are using a service since targets cannot be reloaded.

[Unit]
Description=Anonymizing overlay network for TCP (multi-instance-master)

[Service]
Type=oneshot
RemainAfterExit=yes
ExecStart=/bin/true
ExecReload=/bin/true

[Install]
WantedBy=multi-user.target

Там дійсно

ExecStart=/bin/true
ExecReload=/bin/true

Чи то від нас ховаєте справжні шляхи?

17 Відповідь від Paveldz

  • Paveldz
  • Paveldz
  • Користувач
  • Поза форумом
  • Дата реєстрації: 15.05.2015
  • Повідомлень: 78
    • Репутація: 10

Re: Автозапуск сервісу Ubuntu

Нічого не ховаю. Там так дійсно.

Paveldz вебсайт

18 Відповідь від reverse2500

  • reverse2500
  • reverse2500
  • Я діск С на троянському коні
  • Поза форумом
  • Звідки: UA Львів
  • Дата реєстрації: 08.07.2014
  • Повідомлень: 2 745
    • Репутація: 1318

Re: Автозапуск сервісу Ubuntu

Paveldz написав:

Завжди через gedit все редагую.

тоді раджу редагувати конфіги в nano, vim

reverse2500 вебсайт

19 Відповідь від Paveldz

  • Paveldz
  • Paveldz
  • Користувач
  • Поза форумом
  • Дата реєстрації: 15.05.2015
  • Повідомлень: 78
    • Репутація: 10

Re: Автозапуск сервісу Ubuntu

reverse2500 написав:
Paveldz написав:

Завжди через gedit все редагую.

тоді раджу редагувати конфіги в nano, vim

Зрозумів. Буду редагувати в nano або vim. А з privoxy допоможете? Не розумію чому воно не запускається автоматично при завантажені?

Paveldz вебсайт

20 Відповідь від reverse2500

  • reverse2500
  • reverse2500
  • Я діск С на троянському коні
  • Поза форумом
  • Звідки: UA Львів
  • Дата реєстрації: 08.07.2014
  • Повідомлень: 2 745
    • Репутація: 1318

Re: Автозапуск сервісу Ubuntu

А з privoxy допоможете? Не розумію чому воно не запускається автоматично при завантажені?

не можу, я не дуже знаю ubuntu, за великий список лінукс дистрибутивів, скажу так, лінукс ніхто толком не знає.

reverse2500 вебсайт